- Programmable charge rates
- Simultaneous charging of multiple batteries
- Built-in test equipment (BITE)
- Operator control through a membrane key-pad
- Serial computer communication interface
- On-request status information displays
|
 |
|
| Voltage | 115 VAC, 60 Hz/230 VAC, 50 Hz/28 VDC | | Power | 250 W maximum |
|
| Number of channels | Up to 8, simultaneous charging or reconditioning | | Battery serviceable: | | Types | Nickel cadmium, nickel metal hydride | | Voltage | 4.8 VDC to 24 VDC nominal | | Capacity | 0.3 AH to 9 AH |
|
| Charging | Automatic start, Automatic trickle charge at end of charge detection, Temperature compensation | | Analyzing | Capacity status measurement, Fault detection (open circuit, short circuit, shorted cells, reverse polarity and high resistance). | | Reconditioning | Automatic charge/discharge cycling | | Protection | Over current and DC input reverse polarity | | Efficiency | 80% at maximum load | | Built-in test (BIT) | Indications through front panel LED's and display and RS232 serial communications port |
|
| Operating Temperature | -40°C to +°50C | | Shock | Functional, crash-hazard, transit drop and bench-handling to MIL-STD-810D, Method 516.3 | | Vibration | Basic transportation, loose cargo and ground mobile to MIL-STD-810D, Method 514.3 | | Shock radiation | Hot dry temperature to MIL-STD-810D, Method 505.2 | | Altitude | 4750 meters to MIL-STD-810D, Method 500.2 |
|
| (LXWXH Inches) | 9.1 x 13.5 x 17.9 | | Weight (LBS. Max) | 35 lbs |
|